| CENTER SECTION HEIGHT | 1.062 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 14.000 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.658 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG WIDTH | 14.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 10.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.880 INCHES NOMINAL |
| SECOND LEG ANGLE | 94.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 3.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG WIDTH | 14.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 OR TY 2,CL 1 OR CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |