|
|
|
National Stock Number:
5340-01-327-4354
Federal Supply Class:
5340
National Item Identification Number:
013274354
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| C5088333 | 23667 | SMITHS DETECTION INC. | | C5088333 | 57946 | US ARMY COMBAT SURVEILLANCE AND TARGET ACQUISITION LABORATORY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.400 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.150 INCHES NOMINAL | | CENTER SECTION WIDTH | 3.250 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.750 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.089 INCHES NOMINAL | | FIRST LEG LENGTH | 0.428 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.250 INCHES NOMINAL | | FIRST LEG WIDTH | 3.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,T651 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8,T651 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | THREADED AND PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CUTOUT LENGTH | 0.480 INCHES NOMINAL | | SECOND LEG CUTOUT WIDTH | 2.290 INCHES NOMINAL | | SECOND LEG LENGTH | 0.720 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG STYLE | CUT OUT | | SECOND LEG THICKNESS | 0.150 INCHES NOMINAL | | SECOND LEG WIDTH | 3.250 INCHES NOMINAL | | SPECIAL FEATURES | SECOND LEG HAS TWO NOTCHES INSIDE OF CUTOUTS,0.188 IN. MIN AND 0.193 IN. MAX HOLE DIA TWO PLACES CENTER SECTION | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|