|
|
|
National Stock Number:
5340-01-330-3420
Federal Supply Class:
5340
National Item Identification Number:
013303420
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 937555-103 | 17772 | AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC | | 937555-103 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.000 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL | | CENTER SECTION WIDTH | 3.000 INCHES NOMINAL | | FIRST LEG ANGLE | 0.12 RADIANS NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL | | FIRST LEG END WIDTH | 2.500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG LENGTH | 0.400 INCHES NOMINAL | | FIRST LEG WIDTH | 3.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 0.12 RADIANS NOMINAL | | SECOND LEG LENGTH | 5.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG END RADIUS | 0.062 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.327 INCHES MINIMUM AND 0.334 INCHES MAXIMUM | | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL | | SECOND LEG WIDTH | 3.500 INCHES NOMINAL | | SPECIAL FEATURES | SECOND LEG OFFSET,1.000 IN. LG,0.690 IN. W,HAS ONE HOLE,0.249 IN. MIN DIA AND 0.255 IN. MAX DIA; 0.380 IN. DISTANCE FROM EDGE TO HOLE CENTER ALONG W; TWO HOLES IN CENTER SECTION,0.198 IN. MIN DIA AND 0.204 IN. MAX DIA | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|