| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 2.386 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.261 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.690 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.661 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN |
| SPECIAL FEATURES | ADDITIONAL HOLES 1ST LEG,0.515 IN. DIA AND 0.1865 IN. MIN AND 0.1870 IN. MAX DIA; INSERTS,MS124656 INSTALLED IN ALL 0.261 DIA HOLES; DIAMOND PIN INSTALLED ON FIRST LEG; HOLE IN GUSSET 0.625 IN. DIA; COLOR NUMBER 26555,FED-STD-595 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.280 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.200 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-22750,CLASS 1,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYAMIDE AND PLASTIC EPOXY |