| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FIRST LEG ANGLE | 69.0 DEGREES MINIMUM AND 71.0 DEGREES MAXIMUM |
| FIRST LEG LENGTH | 1.420 INCHES MINIMUM AND 1.540 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5599 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | NICKEL ALLOY 625 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.320 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.650 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.390 INCHES NOMINAL |
| SPECIAL FEATURES | CLIP,SPRING TENSION RIVETED TO 1ST LEG |
| STYLE DESIGNATOR | OFFSET ANGLE |