|
|
|
National Stock Number:
5340-01-331-5886
Federal Supply Class:
5340
National Item Identification Number:
013315886
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 1010740-001 | 05037 | ANACOMP, INC. | | 1010740-001 | 0EJ31 | PARIS PRECISION INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.910 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL | | CENTER SECTION WIDTH | 4.250 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL | | FIRST LEG WIDTH | 4.250 INCHES NOMINAL | | FIRST LEG LENGTH | 0.200 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | COUNTERSUNK | | SECOND LEG ANGLE | 135.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.196 INCHES NOMINAL | | SECOND LEG LENGTH | 0.720 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL | | SECOND LEG WIDTH | 5.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SPECIAL FEATURES | W/2 STUDS AND 2 HALF GROMMETS | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|