|
|
|
National Stock Number:
5340-01-333-5570
Federal Supply Class:
5340
National Item Identification Number:
013335570
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 687-2520-001 | 13499 | ROCKWELL COLLINS, INC. | | 687-2520-001 | 95105 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.840 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.150 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.112 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.170 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | FIRST LEG WIDTH | 0.245 INCHES NOMINAL | | FIRST LEG LENGTH | 1.050 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304 | | MOUNTING HOLE TYPE | THREADED | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | SECOND LEG LENGTH | 1.050 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1,TY 2,TY 3,TY 6 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|