| CENTER SECTION HEIGHT | 3.120 INCHES MINIMUM AND 3.160 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.200 INCHES NOMINAL |
| CENTER SECTION WIDTH | 4.320 INCHES NOMINAL |
| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.410 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.720 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.880 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.200 INCHES NOMINAL |
| FIRST LEG WIDTH | 4.320 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.880 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| REINFORCEMENT METHOD | TURNED EDGE |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG THICKNESS | 0.200 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.880 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SPECIAL FEATURES | CENTER SECTION 1 HOLE 0.567 IN. MIN,0.571 IN. MAX DIA W/NUT,1 SMALL HOLE 0.280 IN. DIA |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |