|
|
|
National Stock Number:
5340-01-336-0098
Federal Supply Class:
5340
National Item Identification Number:
013360098
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 2256631 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 10.250 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.625 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG LENGTH | 1.125 INCHES NOMINAL | | FIRST LEG SLOT LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG SLOT WIDTH | 0.187 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304 | | MOUNTING HOLE TYPE | PLAIN | | REINFORCEMENT METHOD | TURNED EDGE | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG LENGTH | 1.125 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SPECIAL FEATURES | TWO HOLES ALONG CENTER SECTION 0.196 IN. NOM DIA | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT | PRIMER |
|
|