|
|
|
National Stock Number:
5340-01-359-2327
Federal Supply Class:
5340
National Item Identification Number:
013592327
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 1257AS126-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.562 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.062 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | COUNTERSUNK | | SECOND LEG ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.375 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.344 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.156 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 0.375 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | PAINT |
|
|