5340-01-359-3661, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-01-359-3661

Federal Supply Class:
5340

National Item Identification Number:
013593661

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

687-3592-002

95105

ROCKWELL COLLINS, INC.

Techincal Specification:

CENTER SECTION HEIGHT	4.080 INCHES NOMINAL
CENTER SECTION THICKNESS	0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM
CENTER SECTION WIDTH	1.200 INCHES NOMINAL
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FIRST LEG CHAMFER ANGLE	40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	0.330 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES NOMINAL
FIRST LEG END WIDTH	1.020 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	THREE HOLES
FIRST LEG HOLE DIAMETER	0.217 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	0.420 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH	0.660 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.230 INCHES NOMINAL
FIRST LEG STYLE	CHAMFERED ENDS
FIRST LEG THICKNESS	0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM
FIRST LEG WIDTH	1.140 INCHES NOMINAL
FIRST LEG LENGTH	1.040 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 5052
MOUNTING HOLE TYPE	PLAIN
REINFORCEMENT METHOD	TURNED EDGE
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG CHAMFER ANGLE	40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
SECOND LEG END WIDTH	0.380 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
SECOND LEG HOLE DIAMETER	0.217 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.320 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES NOMINAL
SECOND LEG THICKNESS	0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM
SECOND LEG WIDTH	0.500 INCHES NOMINAL
SECOND LEG LENGTH	1.340 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG STYLE	CHAMFERED ENDS
STYLE DESIGNATOR	DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial