|
|
|
National Stock Number:
5340-01-359-9475
Federal Supply Class:
5340
National Item Identification Number:
013599475
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 40A16310-1 | 14170 | HUGHES MISSILE SYSTEMS CO SAN DIEGO | | 40A16310-1 | 15090 | RAYTHEON COMPANY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.190 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.100 INCHES NOMINAL | | FIRST LEG CUTOUT LENGTH | 0.700 INCHES NOMINAL | | FIRST LEG CUTOUT WIDTH | 0.330 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.980 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.060 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES NOMINAL | | FIRST LEG STYLE | CUT OUT | | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL | | FIRST LEG WIDTH | 1.100 INCHES NOMINAL | | FIRST LEG LENGTH | 0.700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-25043,COND C OR A MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 631 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG CUTOUT LENGTH | 0.700 INCHES NOMINAL | | SECOND LEG CUTOUT WIDTH | 0.330 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.540 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL | | SECOND LEG WIDTH | 1.100 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CUT OUT | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|