|
|
|
National Stock Number:
5340-01-360-3132
Federal Supply Class:
5340
National Item Identification Number:
013603132
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 1220C0891 | 03538 | LOCKHEED MARTIN CORPORATION | | 1220C0891 | 54497 | MARTIN MARIETTA TECHNOLOGIES INC SUB OF MARTIN MARIETTA CORP AERO AND NAVAL SYSTEMS |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 3.245 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 4.120 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.329 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.173 INCHES MAXIMUM | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.812 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 4.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 4.120 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|