|
|
|
National Stock Number:
5340-01-436-2269
Federal Supply Class:
5340
National Item Identification Number:
014362269
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 3311251-1 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.700 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.480 INCHES NOMINAL | | FIRST LEG SLOT WIDTH | 0.175 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.093 INCHES NOMINAL | | FIRST LEG WIDTH | 2.000 INCHES NOMINAL | | FIRST LEG LENGTH | 1.250 INCHES NOMINAL | | FIRST LEG SLOT LENGTH | 0.370 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.000 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.630 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.093 INCHES NOMINAL | | SECOND LEG WIDTH | 2.000 INCHES NOMINAL | | SECOND LEG LENGTH | 1.250 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | ANGLE | | SPECIAL FEATURES | USED ON SUPPORT,WL200,BLEED AIR DUCT,CARGO FLOOR HEAT |
|
|