| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 19.6 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 19.7 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 40.7 MILLIMETERS MINIMUM AND 42.5 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG ANGLE | 6.2 RADIANS MINIMUM AND 7.8 RADIANS MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 24.4 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 95.6 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 17.4 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 113.0 MILLIMETERS MINIMUM AND 114.6 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 157.9 MILLIMETERS MINIMUM AND 159.5 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A570,GR 50 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 74.6 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 28.6 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 60.3 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 25.4 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 120.6 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 9.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM |
| SECOND LEG LENGTH | 113.5 MILLIMETERS MINIMUM AND 115.1 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 157.9 MILLIMETERS MINIMUM AND 159.5 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PHOSPHATE AND PRIMER AND PLASTIC POLYURETHANE |