| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 7.2750 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 3.2500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2690 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.60 RADIANS NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 RADIANS NOMINAL |
| FIRST LEG CUTOUT LENGTH | 1.5400 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.8750 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.0900 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.1380 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.5000 INCHES NOMINAL |
| FIRST LEG WIDTH | 8.3800 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 7.8410 INCHES MINIMUM AND 7.8470 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 4.1880 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.8250 INCHES MINIMUM AND 1.8310 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.7500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.1120 INCHES NOMINAL |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG THICKNESS | 0.1090 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |