| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 6.2500 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN THIRD AND FOURTH HOLE CENTERS ALONG WIDTH | 4.5000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 4.7500 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.7500 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.3750 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.1870 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.7500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 4 SLOTS |
| FIRST LEG THICKNESS | 0.0940 INCHES NOMINAL |
| FIRST LEG WIDTH | 17.0000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| SECOND LEG CUTOUT LENGTH | 0.5000 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 2.5000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.2210 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.7500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.3120 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 6.8400 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.0940 INCHES NOMINAL |
| SECOND LEG WIDTH | 17.0000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C5541, CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |