| FEATURES PROVIDED | MOUNTING PAD |
| FIRST LEG ANGLE | 0.188 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG END WIDTH | 2.370 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/4 FED SPEC 1ST MATERIAL RESPONSE OR ASTM B221 ASSN STD 1ST MATERIAL RESPONSE OR QQ-A-200/5 FED SPEC 1ST MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.594 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.750 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.800 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.406 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | PLATE MATERIAL ALUMINUM ALLOY 5086 OR 5083 DETERMINED BY FED SPEC QQ-A-250/7 OR ASTM B209,5083-H32 |
| STYLE DESIGNATOR | ANGLE |