| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 56.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 2.0 DEGREES MINIMUM AND 6.0 DEGREES MAXIMUM |
| FIRST LEG CORNER RADIUS | 4.0 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 34.0 MILLIMETERS MINIMUM AND 38.0 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.0747 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 7.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 74.0 MILLIMETERS MINIMUM AND 78.0 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A366 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A569 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 61.0 MILLIMETERS MINIMUM AND 65.0 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 48.0 MILLIMETERS MINIMUM AND 52.0 MILLIMETERS MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 35.4 MILLIMETERS NOMINAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.0747 INCHES NOMINAL |
| SECOND LEG WIDTH | 74.0 MILLIMETERS MINIMUM AND 78.0 MILLIMETERS MAXIMUM |
| SPECIAL FEATURES | CENTER HOLE ON SECOND;FOUR EXTENDED KEYS EQUALLY SPACED ON DIAMETER |
| STYLE DESIGNATOR | ANGLE |