| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.988 INCHES MINIMUM AND 1.012 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.120 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.198 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,T6 FED SPEC 1ST MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 7075 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLIP-ANGLE,TRANSDUCERINSTL,RUDDER |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.115 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.714 INCHES MINIMUM AND 1.746 INCHES MAXIMUM |
| SPECIAL FEATURES | LEFT HAND |
| STYLE DESIGNATOR | ANGLE |