|
|
|
National Stock Number:
5340-01-474-6634
Federal Supply Class:
5340
National Item Identification Number:
014746634
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| ZL18SS6 | 00843 | HOFFMAN ENGINEERING CO DIV OF FEDERAL CARTRIDGE CORP |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.757 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.053 INCHES MINIMUM AND 0.059 INCHES MAXIMUM | | CENTER SECTION WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG ANGLE | 69.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.062 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.059 INCHES MAXIMUM | | FIRST LEG WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG LENGTH | 0.226 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP,JIC | | MATERIAL | STEEL COMP 316L | | SECOND LEG ANGLE | 96.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | SECOND LEG LENGTH | 0.570 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.278 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.445 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.059 INCHES MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG SLOT LENGTH | 0.375 INCHES NOMINAL | | SECOND LEG SLOT WIDTH | 0.266 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|