| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.030 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.200 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,SPRING |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A-36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.770 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.135 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.060 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.190 INCHES NOMINAL |
| SECOND LEG SLOT OFFSET ANGLE | 0.0 DEGREES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.121 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |