| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.313 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 1.323 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.438 INCHES NOMINAL |
| BLOCK HEIGHT | 2.550 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 4.800 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.400 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 3.285 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 3.400 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 6.570 INCHES NOMINAL |
| CLAMPING HOLE DIAMETER | 0.342 INCHES MINIMUM ALL HOLES AND 0.354 INCHES MAXIMUM ALL HOLES |
| CLAMPING HOLE QUANTITY | 4 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP,BLOCK |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.342 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 3 |
| OVERALL HEIGHT | 2.550 INCHES NOMINAL |
| OVERALL LENGTH | 7.446 INCHES NOMINAL |
| OVERALL WIDTH | 0.620 INCHES NOMINAL |
| SPECIAL FEATURES | THE STOCK SHEET SIZE IS 0.625 X 3.000 X 8.000 ALL IN INCHES |
| STYLE DESIGNATOR | RECTANGULAR |