| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.700 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.400 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.094 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 5PT-4G10K10A77 MFR REF ALL MATERIAL RESPONSES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SPT BRACKET |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.690 NOMINAL INCHES |
| SECOND LEG END WIDTH | 0.640 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.094 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.640 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.470 INCHES NOMINAL |
| SPECIAL FEATURES | MATERIAL PER MFG DRAWING, HEAT TEAT AND FINISH PER DRAWING |
| STYLE DESIGNATOR | ANGLE |