|
|
|
National Stock Number:
5340-01-488-5902
Federal Supply Class:
5340
National Item Identification Number:
014885902
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 5HM40051-129 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.060 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.880 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG WIDTH | 1.680 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.078 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 T851 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/3 T8511 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, STRUCTURAL COMPONENT AIRCRAFT | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.340 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.212 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.540 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SECOND LEG THICKNESS | 0.078 INCHES NOMINAL | | SECOND LEG LENGTH | 1.000 INCHES NOMINAL | | SECOND LEG WIDTH | 1.680 INCHES NOMINAL | | SPECIAL FEATURES | ITEM REQUIRES 1 NUT, P/N LK204F3;2 RIVETS, P/N MS202426AD3-5 | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|