| CENTER SECTION HEIGHT | 1.250 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.094 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.420 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.410 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.380 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.094 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 T851 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/3 T8511 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, DETAILS-EXTRUSION, HARNESS SUPPORT |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.040 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.094 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.680 INCHES NOMINAL |
| SPECIAL FEATURES | ORIGINAL NAME SUBMITTED FOR CATALOGING-BRACKET, STRUCTURAL COMPONENT, AIRCRAFT;C TO C DIST BTWN 1ST & 3RD HOLE ALONG LENGTH 1.730;ITEM REQUIRES 1 NUTPLATE P/N LK208F4;2 RIVETS P/N MS20426AD3-5;POSITION NUTPLATES TO MAINTAIN .19 MIN. NUTPLATE RIVET EDGE DISTANCE AND TO PREVENT INTERFERENCE OR OVERHANG |
| STYLE DESIGNATOR | DOUBLE ANGLE |