| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.4000 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.5000 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5000 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.120 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.500 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.500 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.5000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMST B221,5086-H111 OR H112 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5086 |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.6250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.2500 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.500 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.5000 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.960 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |