| FIRST LEG ANGLE | 0.080 RADIANS NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG LENGTH | 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST LEG WIDTH | 4.670 INCHES MINIMUM AND 4.710 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | AST-108-69 ASSN STD ALL MATERIAL RESPONSES |
| MATERIAL | STEEL COMP 1018 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.470 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| SECOND LEG WIDTH | 4.670 INCHES MINIMUM AND 4.710 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-22750 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 3RD TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM AND PRIMER AND PRIMER EPOXY |