| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 5.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.780 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | 4 SLOTS |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 5.750 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN THIRD AND FOURTH HOLE CENTERS ALONG WIDTH | 5.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.188 INCHES NOMINAL |
| FIRST LEG WIDTH | 19.190 INCHES MINIMUM AND 19.310 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.810 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.311 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B221-2000 NATIONAL SPEC ALL MATERIAL RESPONSES |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.188 INCHES NOMINAL |
| SECOND LEG WIDTH | 19.190 INCHES MINIMUM AND 19.310 INCHES MAXIMUM |
| SPECIAL FEATURES | MRC MDCL REFLECTS A SUPERCESSION OF QQ-A-200; MRC STDC REFLECTS A SUPERCESSION OF MIL-C-22750; EPOXY COLOR FINISH IS LT GREEN |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-PRF-22750 MIL SPEC ALL TREATMENT RESPONSES |
| SURFACE TREATMENT | PRIMER EPOXY AND PLASTIC EPOXY |