|
|
|
National Stock Number:
5340-01-498-3136
Federal Supply Class:
5340
National Item Identification Number:
014983136
Description:
CLAMP,BRIDGE
Detail:
A CLAMP DESIGNED TO STRADDLE A COVER, DOOR OR LIKE ITEM, AND USED TO SECURE SUCH COVER, DOOR OR LIKE ITEM TO EFFECT A TIGHT JOINT OR SEAL.
|
Manufacturer Information:
| 595-7067876-156 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H692-1802-156 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281, CLASS A, FORM 1, HOT FINISHED FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | FLAT | | HOLE DIAMETER | 0.250 INCHES NOMINAL | | HOLE DEPTH | 0.1875 INCHES NOMINAL | | OVERALL LENGTH | 1.750 INCHES NOMINAL | | OVERALL WIDTH | 1.750 INCHES NOMINAL | | INSIDE LENGTH | 1.531 INCHES NOMINAL | | HEIGHT | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | DRAWING CALLS THIS A RETAINER PIN; IT IS ROUND, NOT FLAT AND MADE FROM 1.750 INCH STOCK; HOLE IN CENTER TOP IS DRILLED THRU AND TAPPED 1/4-20UNC-3B; BOTTOM EDGE IS CHAMFERED ON OUTSIDE 1/16 X 45 DEGREES AND THREADED INTERNALLY 1.500-6UNC-3B |
|
|