|
|
|
National Stock Number:
5340-01-499-9223
Federal Supply Class:
5340
National Item Identification Number:
014999223
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 17P8D9334-508 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.640 INCHES NOMINAL | | CENTER SECTION HEIGHT | 2.480 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.020 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.600 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES NOMINAL | | FIRST LEG LENGTH | 1.250 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.095 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.020 INCHES NOMINAL | | HEAT TREATMENT | H-12 STRAIN HARDENED, 1/4 HARD | | MATERIAL | STEEL COMP 301 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | RETAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | COUNTERBORED | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.020 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.095 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG THICKNESS | 0.020 INCHES NOMINAL | | SECOND LEG LENGTH | 0.710 INCHES NOMINAL | | STYLE DESIGNATOR | OFFSET DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MS5517 ASSN STD SINGLE TREATMENT RESPONSE |
|
|