| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.900 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.740 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5517 TYPE 301 COND 1/4 HARD FINISH NO. 2B ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RETAINER |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CORNER RADIUS | 0.120 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.990 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| SPECIAL FEATURES | CNTR TO CNTR DIST BTWN HOLES ALONG 1.500 IN. |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |