| BLOCK HEIGHT | 0.630 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.124 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.186 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.247 INCHES NOMINAL |
| CLAMPING HOLE DIAMETER | 0.640 INCHES NOMINAL FIRST HOLE |
| CLAMPING HOLE DIAMETER | 0.640 INCHES NOMINAL THIRD HOLE |
| CLAMPING HOLE DIAMETER | 0.766 INCHES NOMINAL SECOND HOLE |
| CLAMPING HOLE QUANTITY | 3 |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.2875 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.406 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.937 INCHES NOMINAL |
| OVERALL LENGTH | 3.060 INCHES NOMINAL |
| OVERALL WIDTH | 0.575 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, BLOCK - TUBE SUPPORT, PLASTIC |
| MATERIAL | PLASTIC |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| SPECIAL FEATURES | NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2 |
| STYLE DESIGNATOR | RECTANGULAR |
| SUPPLEMENTARY FEATURES | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |