|
|
|
National Stock Number:
5340-01-501-3954
Federal Supply Class:
5340
National Item Identification Number:
015013954
Description:
STANDOFF,THREADED,SPACING
Detail:
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
|
Manufacturer Information:
| 9D0171-3P12 | 88277 | THE BOEING COMPANY | | CB3001AA3-12HP | 66530 | CLICK BOND INC | | SB800UG1012P | 03296 | NMC GROUP, INC. |
|
Techincal Specification:
| DIAMETER | 1.25 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND | | FLANGE DIAMETER | 1.25 INCHES NOMINAL | | FLANGE THICKNESS | 0.015 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | LENGTH | 0.75 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | POST,ELECTRICAL-MECHANICAL EQUIPMENT-LOCKING THREAD,BONDED | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.1900 INCHES FLANGE HOLE | | SPECIAL FEATURES | OTHER MATERIAL GLASS/THERMOPLASTIC (ULTEM 2300);P DESIGNATION IN PART NUMBER INDICATES A BASE FINISH OF EPOXY PRIMER PER MIL-P-85582; AN INSPECTION HOLE IS REQUIRED FOR PARTS WITH A SPECIFIED LENGTH OF 0.500 INCHES OR LONGER AND SHALL BE LOCATED APPROXIMATELY TWO THREAD PITCHES BELOW THE INSERT | | STYLE DESIGNATOR | FLANGED | | SURFACE TREATMENT | ANODIZE STANDOFF | | SURFACE TREATMENT | PASSIVATE INSERT | | THREAD CLASS | 3B FLANGE HOLE | | THREAD DIRECTION | RIGHT-HAND FLANGE HOLE | | THREAD LENGTH | 0.75 INCHES NOMINAL FLANGE HOLE | | THREAD QUANTITY PER INCH | 32 FLANGE HOLE | | THREAD SERIES DESIGNATOR | UNF FLANGE HOLE |
|
|