| FIRST LEG ANGLE | 93.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST LEG END WIDTH | 3.120 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.187 INCHES NOMINAL |
| FIRST LEG WIDTH | 4.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.910 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A656, GR 80 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 4.625 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.625 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 2.625 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.337 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.187 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.280 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.510 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SPECIAL FEATURES | FIRST LEG BENDS BACK FROM RIGHT EDGE OF SECOND LEG AND HAS 2 SLOTS 0.560-0.570 HIGH X 0.750 WIDE, CENTERED 2.475 INCHES APART AND 0.560 FROM END OF LEG; THERE IS A SECOND PLATE WELDED AS A GUSSET/BRACE AT THE LENGTHWISE CENTER OF FIRST LEG; SECOND LEG HAS AN ARCHED CUTOUT ON THE TOP EDGE, WITH RADIUSOF 0.50 CENTERED 1.72 FROM LEFT EDGE& 0.56 FROM TOP EDGE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, FINISH 5.1.1 OR 5.2, COLOR WHITE MIL STD 1ST TREATMENT RESPONSE |
| SURFACE TREATMENT | PAINT |