|
|
|
National Stock Number:
5340-01-503-9404
Federal Supply Class:
5340
National Item Identification Number:
015039404
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 132-566 | 03533 | CRANE CARRIER COMPANY, LLC | | A132-566 | 03533 | CRANE CARRIER COMPANY, LLC | | B132-0566 | 03533 | CRANE CARRIER COMPANY, LLC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.250 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.060 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.620 INCHES NOMINAL | | FIRST LEG ANGLE | 0.1 RADIANS NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.060 INCHES NOMINAL | | FIRST LEG WIDTH | 2.620 INCHES NOMINAL | | FIRST LEG LENGTH | 2.000 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GUARD, MISC-5TH WHEEL RELEASE-VALVE MILL CYT | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A663/A663M-1989(R00) NATIONAL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 0.1 RADIANS NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.310 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.310 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.060 INCHES NOMINAL | | SECOND LEG WIDTH | 2.620 INCHES NOMINAL | | SECOND LEG LENGTH | 2.750 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG SLOT LENGTH | 1.500 INCHES NOMINAL | | SECOND LEG SLOT WIDTH | 0.380 INCHES NOMINAL | | SECOND LEG STYLE | END RADIUS | | SPECIAL FEATURES | TWO 0.250 IN MOUNTING HOLES ARE SPACED 1.50 IN APART ON A LINE PARALLEL WITH SLOT WITH CENTERS LOCATED 0.38 INBELOW HORIZONTAL CENTER LINEOF SLOT, AND HOLES CENTERS ARE EACH LOCATED 0.75 IN FROM VERTICAL CENTER LINE OF SLOT | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|