|
|
|
National Stock Number:
5340-01-509-4734
Federal Supply Class:
5340
National Item Identification Number:
015094734
Description:
BRACKET,MOUNTING
Detail:
A bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
|
Manufacturer Information:
| 6391073 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6391073 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| OVERALL HEIGHT | 0.770 INCHES NOMINAL | | OVERALL LENGTH | 9.000 INCHES NOMINAL | | OVERALL WIDTH | 1.970 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, ISOLATOR TIE | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209, TEMPER H32 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5086 | | MOUNTING HOLE DIAMETER | 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | MOUNTING HOLE TYPE | PLAIN | | MOUNTING HOLE QUANTITY | 2 | | SPECIAL FEATURES | BOTTOM FRONT EDGE IS CUT OFF 0.500 X 0.500 INCH ON EACH SIDE; MOUNTING HOLES ON FRONT ARE CENTERED 0.515 FROM TOP EDGE AND 1.625 FROM EACH SIDE; TOP HAS 2 HOLES THD FOR 0.375-16 UNC-2B HELICAL COIL INSERT (PER MS33537, ASSEMBLED WET) CENTERED 0.985 FROM FRONT EDGE AND 0.750 FROM EACH SIDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A&&JBATT-P-645 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ZINC |
|
|