|
|
|
National Stock Number:
5340-01-509-4782
Federal Supply Class:
5340
National Item Identification Number:
015094782
Description:
BRACKET,MOUNTING
Detail:
A bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
|
Manufacturer Information:
| 6394155 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6394155 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| OVERALL HEIGHT | 1.500 INCHES NOMINAL | | OVERALL LENGTH | 8.440 INCHES NOMINAL | | OVERALL WIDTH | 1.120 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MOUNTING, BUNK | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209, TEMPER T651 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE DIAMETER | 0.212 INCHES MINIMUM AND 0.218 INCHES MAXIMUM | | MOUNTING HOLE TYPE | COUNTERBORED | | MOUNTING HOLE QUANTITY | 2 | | SPECIAL FEATURES | BOTTOM EDGE HAS LIP 0.120 IN. W X 0.44 H WITH CUTOUT ON EACH SIDE AT TOP EDGE OF LIP, 0.38 W X 0.19 H; MOUNTING HOLES ARE C'BORED 0.373-0.380 AND ARE CENTERED 1.000 FROM BOTTOM EDGE AND 1.720 FROM EACH SIDE EDGE; ALSO HAS 1 HOLE ON EACH SIDE EDGE THD FOR 0.190-32 UNC-2B HELICAL COIL INSERT, CENTERED 0.500 FROM BACK EDGE AND 1.250 FROM BOTTOM EDGE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-24441/20, FORMULA 150, TYPE III MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL-24441/29, FORMULA 150, TYPE IV MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER AND PAINT |
|
|