| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CUTOUT LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG CUTOUT WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.255 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.342 INCHES NOMINAL |
| FIRST LEG STYLE | CUT OUT |
| FIRST LEG THICKNESS | 0.380 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.515 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.750 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,MANIFOLD MOUNTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046, COMP 6AL/4V MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| SECOND LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 3.125 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.625 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.938 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.812 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.125 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SECOND LEG WIDTH | 4.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 8.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SPECIAL FEATURES | HOLES ON FIRST LEG ARE THREADED .250-20 UNC-2B AND CUTOUT STARTS 1.51 FROM TOP EDGE; SECOND LEG HAS 2 ADDITIONAL HOLES, 1.500 IN DIAM, CENTERED 2.500FROM OPEN END AND 1.00 FROM EITHER SIDE; SECOND LEG TAPERS FROM 0.38 FOR 2.94 INCHES FROM ANGLE TO 0.125 FOR LAST 4.560 INCHES |
| STYLE DESIGNATOR | ANGLE |