| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 2.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 2.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.187 INCHES NOMINAL |
| FIRST LEG WIDTH | 6.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, ECS COMPONENTS, STBD BRACKET |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B443, INCONEL 625, ANNEALED ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | NICKEL ALLOY |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.625 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.187 INCHES NOMINAL |
| SECOND LEG WIDTH | 6.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 6.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | ITEMS FURNISHED AS ACCESSORIES: 5 EA: NUT, PLAIN, CINCH, 0.190-32, CRES, PASSIVATED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |