| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG END WIDTH | 5.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.437 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.500 INCHES NOMINAL |
| FIRST LEG WIDTH | 6.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 6.000 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.875 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046, COMP AB-2, 6AL-4V(ELI), COND ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| MOUNTING HOLE TYPE | THREADED |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG END WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.375 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.500 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 8.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SPECIAL FEATURES | FIRST LEG IS CHAMFERED .50 X .50 ON ALL FOUR CORNERS; SECOND LEG'S MOUNTING HOLES ARE .375-16 UNC-2B |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-24441/20 MIL SPEC 1ST TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |