| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG END WIDTH | 9.370 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.380 INCHES NOMINAL |
| FIRST LEG WIDTH | 10.130 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.880 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046, COMP AB-2, CONDITION ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.884 INCHES NOMINAL |
| SECOND LEG END WIDTH | 4.870 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 3 SLOTS |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.119 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.380 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.630 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.750 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.437 INCHES NOMINAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | SECOND LEG WIDTH AT ANGLE IS 10.130; LEFT SIDE TAPERS FROM POINT 0.75 FROM ANGLE END TO POINT 3.130 FROM ANGLE END AND 2.07 FROM LEFT EDGE; RIGHT SIDE LOWER POINT IS 2.43 FROM RIGHT EDGE WITH RESULTING WIDTH FROM THESE POINTS DOWN BEING 5.63 IN. |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-24441/29 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-24441/31 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |