| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG END WIDTH | 5.370 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG THICKNESS | 0.380 INCHES NOMINAL |
| FIRST LEG WIDTH | 6.130 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.880 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046, COMP AB-2, CONDITION ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG END WIDTH | 1.870 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.450 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.450 INCHES NOMINAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.380 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.750 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.630 INCHES MINIMUM AND 5.630 INCHES MAXIMUM |
| SPECIAL FEATURES | 2ND LEG IS 6.130 AT ANGLE/TOP; LEFT SIDE TAPERS FROM POINT 0.75 FROM TOP ON LEFT EDGE TO POINT 2.64 DOWN AND 1.58 FROM LEFT EDGE; RIGHT SIDE TAPERS FROM POINT 0.75 FROM TOP ON RIGHT EDGE TO POINT 1.98 DOWN AND 0.92 FROM RIGHT EDGE WITH RESULTING WIDTH FROM THIS POINT DOWN 3.63 IN. |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-24441/29 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-24441/31 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |