5340-01-509-7625, BRACKET,DOUBLE ANGLE

5935-01-509-7624 CLAMP,CABLE,ELECTRICAL CONNECTOR

5935-01-509-7626 CLAMP,CABLE,ELECTRICAL CONNECTOR

National Stock Number:
5340-01-509-7625

Federal Supply Class:
5340

National Item Identification Number:
015097625

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

7326337	53711	NAVAL SEA SYSTEMS COMMAND
7326337-02	31442	NORTHROP GRUMMAN SYSTEMS CORPORATION
7326337-02	53711	NAVAL SEA SYSTEMS COMMAND

Techincal Specification:

CENTER SECTION HEIGHT	2.950 INCHES NOMINAL
CENTER SECTION THICKNESS	0.125 INCHES NOMINAL
CENTER SECTION WIDTH	5.380 INCHES NOMINAL
FURNISHED ITEMS	2 CAPTIVE SCREWS, LOW PROFILE
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FIRST LEG CORNER RADIUS	0.060 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.375 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	FOUR HOLES
FIRST LEG HOLE DIAMETER	0.154 INCHES MINIMUM AND 0.157 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	1.090 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	2.950 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.155 INCHES NOMINAL
FIRST LEG STYLE	CORNER RADIUS
FIRST LEG THICKNESS	0.125 INCHES NOMINAL
FIRST LEG WIDTH	5.380 INCHES NOMINAL
FIRST LEG LENGTH	2.050 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY	BRACKET, MOUNTING, 1553 BUS COUPLER
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM B209, TEMPER H32 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 5052
MOUNTING HOLE TYPE	PLAIN
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	1.090 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	FOUR HOLES
SECOND LEG HOLE DIAMETER	0.154 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	2.950 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.155 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.425 INCHES NOMINAL
SECOND LEG THICKNESS	0.125 INCHES NOMINAL
SECOND LEG WIDTH	5.380 INCHES NOMINAL
SECOND LEG LENGTH	2.050 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG STYLE	SQUARE
STYLE DESIGNATOR	ADJACENT ANGLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial