| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG END WIDTH | 8.500 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.264 INCHES MINIMUM AND 0.271 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.688 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| FIRST LEG WIDTH | 9.000 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MOUNTIN, SPP |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B308, TAMPER T6 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG END WIDTH | 8.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.264 INCHES MINIMUM AND 0.271 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 9.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | SECOND LEG HAS 2 CUTOUTS, 1.250 W X 0.125 H, CENTERED IN FRONT OF HOLES ALONG OPEN EDGE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-24441/20 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE AND PRIMER AND PAINT |