| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.750 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 2.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.086 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.219 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 10.000 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 5.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.375 INCHES NOMINAL |
| FIRST LEG WIDTH | 16.050 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.380 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MOUNTING, COLD PLATE, PUMPS |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B308, TEMPER T6 ASSN STD 1ST MATERIAL RESPONSE AND ASTM B209, TEMPER T651 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CUTOUT LENGTH | 3.250 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 9.130 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 15.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 3.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.525 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL |
| SECOND LEG WIDTH | 16.050 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| SPECIAL FEATURES | PADS ARE FASTENED ON TOP SIDE OF SECOND LEG WITH SCREWS CENTERED 2.520 AND 13.645 FROM LEFT EDGE AND 1.750 AND 3.750 FROM ANGLE EDGE; SECOND LEG HAS 2 HOLES, 0.542-0.549 IN DIAM. CENTERED BETWEEN EACH LINE OF SCREWS; SECOND LEG'S OUTER EDGES ARE ROUNDED TO RADIUS OF 0.750 AND THE INNER CORNERS TO RADIUS OF 1.250; ITEMS FURNISHED AS ACCESSORIES: AL BRACKET 1; 2EA AL PAD, 2.00 W W X 2.875 L; 4EA SCREW, FLAT HEAD, 100 CTSK (.250) NO. 1/4-20 X .750 CRES, PASSIVATE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |