| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.750 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 4.972 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.335 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.375 INCHES NOMINAL |
| FIRST LEG WIDTH | 16.050 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.250 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MOUNTING, COLD PLATE, PUMPS |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B308, TEMPER T6 ASSN STD 1ST MATERIAL RESPONSE AND ASTM B209, TEMPER T651 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CUTOUT LENGTH | 3.250 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 9.130 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.875 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 11.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.525 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL |
| SECOND LEG WIDTH | 16.050 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| SPECIAL FEATURES | PADS ARE ADHERED TO 2ND LEG 0.92 FROM ANGLE EDGE AND 1.52 AND 12.64 FROM LEFT EDGE; 2ND LEG'S OUTER EDGES ARE ROUNDED TO RADIUS OF 0.750 AND INNER CORNERS TO RADIUS OF1.12; 2 HOLES, 0.545-0.552 IN DIAM, THRU BOTH BRACKET AND PAD, ARE CENTERED 2.425 FROM ANGLE EDGE AND 2.930 AND 14.055 FROM LEFT EDGE; BRACKET 1; 2 EA. PADS, 2.0 X C 3.0 L; EPOXY RESIN; CURING AGENT; ISOPROPYL ALCOHOL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-24441/20 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE AND PRIMER |