|
|
|
National Stock Number:
5340-01-509-8722
Federal Supply Class:
5340
National Item Identification Number:
015098722
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 7326352 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7326352-02 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 7326352-02 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.750 INCHES NOMINAL | | FIRST LEG WIDTH | 6.250 INCHES NOMINAL | | FIRST LEG LENGTH | 6.630 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, INTERLOCK RECEIVER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046, COMP A-B, CONDITION ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE OR -MIL-T-9047, COMP TI-6AL- 4V, ELI, CONDITION ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 3.125 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 4.101 INCHES MINIMUM AND 4.102 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 3.125 INCHES NOMINAL | | SECOND LEG THICKNESS | 1.830 INCHES NOMINAL | | SECOND LEG WIDTH | 7.000 INCHES NOMINAL | | SECOND LEG LENGTH | 7.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG SIDE RADIUS | 3.130 INCHES NOMINAL | | SECOND LEG STYLE | SIDE RADIUS | | SPECIAL FEATURES | TOP PLATE (FIRST LEG) IS 7.0 X 7.0 WITH FRONT LEFT CORNER ROUNDED TO RADIUS OF 3.130 AND WITH PIECE 3.88 W X 8.50 L X 0.75 THK ATTACHED AT ANGLE TO RIGHT EDGE - SEE DRAWING FOR DETAILS; BACK PLATE (SECOND LEG) IS 6.25 W X 6.63 H X 0.75 THK AND IS ATTACHED TO BACK EDGE OF TOP FLUSH WITH LEFT EDGE, LEAVING 0.75 IN. GAP AT RIGHT EDGE | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-24441/29 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-24441/31 MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER AND PAINT |
|
|