| BLOCK HEIGHT | 0.630 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.687 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.375 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 1.375 INCHES NOMINAL |
| CLAMPING HOLE DIAMETER | 0.766 INCHES NOMINAL ALL HOLES |
| CLAMPING HOLE QUANTITY | 2 |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.283 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.218 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.218 INCHES NOMINAL |
| OVERALL LENGTH | 3.187 INCHES NOMINAL |
| OVERALL WIDTH | 0.575 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP,BLOCK-TUBE SUPPORT,PLASTIC |
| MATERIAL | PLASTIC |
| MOUNTING HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING HOLE QUANTITY | 2 |
| SPECIAL FEATURES | MATL NYLON GLASS PER P.S. 14280,GRADE B,CLASS2 |
| STYLE DESIGNATOR | RECTANGULAR |
| SUPPLEMENTARY FEATURES | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM)_ |