|
|
|
National Stock Number:
5340-01-510-5482
Federal Supply Class:
5340
National Item Identification Number:
015105482
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 7031641 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.896 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.380 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG ANGLE | 0.16 RADIANS NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.380 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.375 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.384 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS AND TAPERED | | FIRST LEG THICKNESS | 0.287 INCHES MINIMUM AND 0.297 INCHES MAXIMUM | | FIRST LEG WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG LENGTH | 1.290 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,DOOR HANDLE | | MATERIAL | ALUMINUM ALLOY | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 0.16 RADIANS NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.380 INCHES NOMINAL | | SECOND LEG WIDTH | 1.250 INCHES NOMINAL | | SECOND LEG LENGTH | 2.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT | ANODIZE |
|
|